PunkBuster GUIDs

Pick your game:

Americas Army
Battlefield 1942
Battlefield 2
Battlefield 2142
Call of Duty
Call of Duty: UO
Call of Duty 2
Call of Duty 4
CoD World at War
Crysis
Enemy Territory
F.E.A.R.
Quake 3
Raven Shield
Soldier of Fortune 2
Wolfenstein

How do I find out my America's Army PunkBuster GUID?

If you're not sure how to find out your own AA PB GUID please follow the steps below.

Step 1: Connect to an America's Army server with your ingame name. Step 2: When you have successfully joined a server, open your console (check your key configs, default is the Tilde key). Step 3: Type pb_myguid to the console. The server will reply: "PunkBuster Client: GUID= *YOUR PB GUID IS HERE*". Enter that number on ClanBase on your .

How do I find out my PunkBuster GUID for Battlefield?

If you're not sure how to find out your own PunkBuster GUID for Battlefield please follow the steps below.

	Step 1: Connect to the EA Account server using one of your ONLINE accounts
	Step 2: Make sure PunkBuster is turned on in your game. Step 3: Connect to any PunkBuster-enabled server (recognisable by the PunkBuster symbol).
	Step 4: Open your console (by default the ` key - otherwise check your control settings). Step 5: Type pb_myguid into the console. You can then either take a screenshot or you can directly write down the 32-character GUID. Step 6: Enter that GUID on ClanBase on your ( or ).

How do I find out my CoD PunkBuster GUID?

If you're not sure how to find out your own CoD PB GUID please follow the steps below.

	Step 1: Connect to a PunkBuster-enabled CoD server.
	Step 2: Open your console (by default the ` key - otherwise check your control settings). Step 3: Type /pb_myguid into the console window.
	Step 4: Your CoD PunkBuster GUID will be shown, it is the key with GUID= in front. For example, the CoD PB GUID on this screenshot is bb17686fbb17686fbb17686fbb17686f. Step 5: Enter that CoD PB GUID on ClanBase on your .

How do I find out my CoD2 PunkBuster GUID?

If you're not sure how to find out your own CoD2 PB GUID please follow the steps below.

	Step 1: Connect to a PunkBuster-enabled CoD2 server.
	Step 2: Open your console (by default the ` key - otherwise check your control settings). Step 3: Type /pb_myguid into the console window.
	Step 4: Your CoD2 PunkBuster GUID will be shown, it is the key with GUID= in front. For example, the CoD2 PB GUID on this screenshot ends with d2c1a0fe. Step 5: Enter that CoD2 PB GUID on ClanBase on your .

How do I find out my CoD4 PunkBuster GUID?

If you're not sure how to find out your own CoD4 PB GUID please follow the steps below.

	Step 1: Connect to a PunkBuster-enabled CoD4 server.
	Step 2: Open your console (by default the ` key - otherwise check your control settings). Step 3: Type /pb_myguid into the console window (full 32-digit GUID) or /pb_plist for the final 8-digit GUID you need to register.
	Step 4: Your CoD4 PunkBuster GUID will be shown, it is the key with GUID= in front. For example, the CoD4 PB GUID on this screenshot ends with a0da237c. You may need to enlarge your console (shift + ~) to read it properly. Step 5: Enter the last 8 digits of your CoD4 PB GUID on ClanBase on your .

How do I find out my CoD WaW PunkBuster GUID and enter it to ClanBase?

If you're not sure how to find out your own CoD WaW PB GUID please follow the steps below.

	Step 1: Connect to a PunkBuster-enabled CoD WaW server.
	Step 2: Open your console (by default the ` key - otherwise check your control settings). Step 3: Type /pb_myguid into the console window (full 32-digit GUID) or /pb_plist for the final 8-digit GUID you need to register.
	Step 4: Your CoD WaW PunkBuster GUID will be shown, it is the key with GUID= in front. For example, the CoD WaW PB GUID on this screenshot ends with b00ce0a8. Step 5: Enter the last 8 digits of your CoD WaW PB GUID on ClanBase on your .

How do I find out my Crysis PunkBuster GUID?

If you're not sure how to find out your own Crysis PB GUID please follow the steps below.

	Step 1: Connect to any Crysis server.
	Step 2: Open your console (by default the ` key - otherwise check your control settings). Step 3: Type /pb_myguid into the console window.
	Step 4: Your Crysis GUID will be shown after the text GUID=, in the bottom of your console where you see the red box in the screenshot. Step 5: Enter all 32 digits of your Crysis PB GUID on ClanBase on your .

How do I find out my PunkBuster GUID for Enemy Territory?

If you're not sure how to find out your own ETPBGuid please follow the steps below.

Step 1: Connect to any PunkBuster enabled Enemy Territory server. Step 2: Open your console with `. Step 3: Type /pb_myguid followed by /condump pbguid.txt into the console. Step 4: Your Enemy Territory Guid will be shown in the console log, if you have done the above on an ETPro server then go into your ETPro folder and open the pbguid.txt file which contains the 32-character ET PBGuid. Step 5: Enter your ETPBGuid on your .

How do I find out my F.E.A.R. PunkBuster GUID?

If you're not sure how to find out your own F.E.A.R. PunkBuster GUID please follow the steps below.

	Step 1: Go into 'Client Settings' and set 'Enable PunkBuster to Yes.
	Step 2: Connect to any F.E.A.R. server that has PunkBuster enabled.
	Step 3: Your 32 digit alpha-numeric F.E.A.R. PunkBuster GUID will be shown in the top right side of your screen for a few seconds. Step 4: Enter that F.E.A.R. PunkBuster GUID on ClanBase on your .

How do I find out my PunkBuster GUID for Quake 3?

If you're not sure how to find out your own PunkBuster GUID for Q3 please follow the steps below.

Step 1: Connect to any server that has punkbuster enabled. (You need to have cl_punkbuster 1 variable set in your cfg file) Step 2: Open your console (by default the ` key - otherwise check your control settings) Step 3: If your punkbuster client software is up to date you will see your GUID in the console. Step 4: Your Q3 GUID will be shown next to the text PB Server assigned GUID. Use \condump command to save the text from console to a file. After that you can copy the GUID from the file. Step 5: Enter that GUID on ClanBase on your .

How do I find out my PunkBuster GUID for Raven Shield?

If you're not sure how to find out your own PunkBuster GUID for RvS please follow the steps below.

	Step 1: First you have to make sure that PunkBuster is ENABLED in your game. For this, from MAIN MENU go to "OPTIONS" menu, then "MULTIPLAYER" and see if the "Punk Buster" box is ticked on there.
	Step 2: Next log into UBI.com. For this, from MAIN MENU go to "MULTIPLAYER", click "LOG IN", enter your UBI.com Login Name / Password and accept.
	Step 3: Now show the list of PunkBuster-enabled servers only, because only at those you can check your PunkBuster GUID. For this, while in the servers lobby, click "TECH FILTER" and turn on "Server with PunkBuster" box.
	Step 4: Then join ANY server from the list.
	Step 5: At last, check your PunkBuster GUID on the server. To do it, just after joining, open console, type in "pb_myguid", press ENTER and your PunkBuster GUID will show up in the console. The GUID value is underlined in the image. Enter the RvS GUID (all digits) on ClanBase on your .

How do I find out my PunkBuster GUID for Soldier of Fortune 2?

If you're not sure how to find out your own PunkBuster GUID for SoF2 please follow the steps below.

	Step 1: Connect to any Soldier of Fortune II server.
	Step 2: Open your console (by default the ` key - otherwise check your control settings). Step 3: Type pb_myguid into the console window.
	Step 4: Your SoF2 guid will be shown after the text GUID=, in the bottom of your console where you see the large red box in the screenshot. Step 5: Enter the SoF2 guid (all digits) on ClanBase on your .

How do I find out my PunkBuster GUID for Wolfenstein?

If you're not sure how to find out your own Wolfenstein Guid please follow the steps below.

Step 1: Connect to any PunkBuster enabled Wolfenstein server. Step 2: Open your console with CTRL + ALT + `. Step 3 (optional): Type com_allowconsole 1. This will allow you to use the ` key to access the console more easily. Step 4: Your Wolfenstein Guid is shown in the console log (see image). Take a screenshot or write down the 32-character Wolfenstein Guid. Step 5: Enter your Wolfenstein Guid on your .

Document last revised on 18 December 2009 by wesT-.